H-9430250, SL250 Single-Port Portable Parallel Analyzer (H9430250)

$2,807.00

One portable instrument – all the key parameters you need

Hach’s SL250 Portable Parallel Analyzer (PPA) is an innovative multiparameter water quality meter that allows you to simultaneously perform colorimetric and probe-based measurements. The instrument and corresponding Chemkey reagents are easy to use regardless of technical expertise. Compared to traditional powder or liquid reagent methods, Chemkeys use a simplified testing method that requires no sample preparation, making the process significantly easier, faster, and safer while drastically reducing variability in results.

Colorimetric tests include free chlorine, total chlorine, fluoride, high range manganese, zinc, copper, nitrite, dissolved iron, high and low range alkalinity, high and low range orthophosphate, high and low range hardness, peracetic acid, and more.

Probe-based tests include pH, dissolved oxygen, conductivity, and more.

*Not suitable for chloramination applications*

SKU: H-9430250 Category:

Accuracy and repeatability at your fingertips

Automatic parameter selection and measurement processes make results consistent and repeatable while using the same trusted chemistries as current Hach methods. Avoid manual steps that can introduce variability between users.

Perform your tests faster

With sample prep eliminated, get the results you need faster. You have the ability to perform up to three simultaneous tests.

No need to handle chemicals

A single instrument combines colorimetric and probe-based testing in a field kit that requires fewer accessories. All chemicals and processes are entirely contained inside the Chemkey. There are no powder pillows or glass vials to handle.

Battery Life >200 Chemkey tests per full battery charge
Certifications CE, UKCA, FCC, ISED, RCM, KC
Connector 5-Pin Input Connector: Two M12 connectors for IntelliCal™ probes
Data Memory Memory: 1000 measured values (result, date, time, site ID, user ID)
Data Storage Automatic in Press to Read measurement mode. Manual in Continuous measurement mode
Detector Silicon photodiode
Dimensions 13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.)
Enclosure Rating IP54
Instrument Bundle SL250 Single-Port Portable Parallel Analyzer (PPA)
Interfaces Mini USB port
Lock Function For IntelliCAL™ Probes: Press to Read and Continuous measurement mode
Measurement Modes Transmittance (%), Absorbance (abs) and Concentration (Conc)
Number of Channels 1
Operating Temperature Range 5 – 50 °C (41 – 122 °F), maximum 85% relative humidity (non-condensing)
Output Voltage 12 V at 3A output
Power Requirements (Hz) 50/60 Hz
Power Requirements (Voltage) 100 – 240 VAC
Power Supply 2.5 mm Jack
Protection Class III
Temperature Charging Temperature: 5 – 45 °C (41 – 113 °F), maximum 85% relative humidity (noncondensing)
Storage Temperature: -20 – 60 °C (-4 – 140 °F), maximum 85% relative humidity (noncondensing)
Temperature Correction For IntelliCAL Probes: Off, automatic and manual (parameter dependent)
Temperature Input 5 – 45 °C (41 – 113 °F), maximum 85% relative humidity (non-condensing)
Warranty 12 months
Weight 1.0 kg (2.2 lb)
What’s included? SL250 PPA with carry case, 125 V power cable and manual
Shopping Cart
Scroll to Top